The engineering system behind GODI’s quotation service.

SIS is a Windows desktop engineering system developed by GODI for stamping RFQs and quotation preparation. It connects part information, manufacturing concepts, press checks and costs so alternatives can be evaluated on a consistent basis.

SIS supports the calculations and evidence. GODI engineers define the concepts, review the inputs and make the engineering recommendation.

GODI engineers
  • Define concepts
  • Review inputs
  • Recommend
SIS
  • Calculations
  • Comparisons
  • Evidence
Engineer-reviewed quotation basis

One connected path from RFQ scope to report

  1. 01
    Scope
    RFQ, part, material, volumes, requirements
  2. 02
    Concepts
    Checked alternatives, engineer-reviewed
  3. 03
    Selected scenario
    Evaluated and chosen by the engineer
  4. 04
    Engineering
    Stations, press checks, production plan
  5. 05
    Tool Cost
    Tooling estimate
  6. 06
    Piece Cost
    Piece-cost scenarios
  7. 07
    Report
    Quotation basis
The selected scenario carries into engineering and costing

Six problems, one engineering basis

01

RFQ data arrives in scattered files

Bring the inputs together

  • STEP / IGES
  • Sections
  • Material data
  • Drawing evidence
  • Revisions
Technical detail

Inspect supported STEP/IGES geometry, measurements and sections, and link material data and supported drawing evidence to the part. Keep assumptions and revisions visible.

02

The first concept is not always the right one

Compare manufacturing concepts

  • Progressive
  • Transfer
  • Combined
  • Nesting
  • 1- / 2- / 3-out
  • Pitch
Technical detail

Evaluate progressive, transfer and combined routes together with nesting configurations and 1-, 2- and 3-out options, with station planning, pitch and parts per stroke. Compare dedicated tooling or shared dies with exchangeable elements where appropriate.

03

Will it run on the available presses?

Check the press and production plan

  • Force
  • Energy
  • Timing
  • Eccentric load
  • Shut height
  • Press hours
Technical detail

Check force, energy, timing, eccentric and reverse/stripping loads alongside die footprint and shut height. Compare supported presses, operating speeds, output and press hours.

04

Tooling and piece cost are estimated apart

Connect tooling and piece costs

  • Material
  • Scrap
  • Machine time
  • Labour
  • Changeovers
  • Payback
Technical detail

Build tooling estimates and piece-cost scenarios from material, scrap, machine time, labour, efficiency and changeovers. Compare total project economics, including maintenance and tooling payback assumptions.

05

Why was this concept chosen?

Keep engineering decisions traceable

  • Forming
  • Thinning
  • Springback
  • Requirements
  • Changes

Forming, thinning and springback results from SIS solvers, reviewed by GODI engineers and traceable to inputs.

Technical detail

Record forming, thinning and springback results from SIS solvers, customer requirements and the evidence behind decisions. Track revised geometry and engineering changes.

06

The offer needs a defendable basis

Turn analysis into a quotation basis

  • Internal
  • Customer feasibility
  • Toolmaker
  • HTML / PDF
Technical detail

Produce structured internal, customer feasibility and toolmaker reports showing the selected scenario, alternatives, assumptions and open points. Supported report outputs include HTML/PDF.

SIS Solvers

SIS includes a family of deterministic engineering solvers developed by GODI as native C++ routines — built in-house from first principles, based on published scientific and engineering literature. They run locally, give fast and repeatable results, and are validated by continuous comparison with industry-standard forming simulation on real production parts. Every deviation is recorded, resolved and re-verified.

Concept & layout

  • One-step forming solver

    Blank development and early formability from part geometry.

  • Nesting solver

    Blank nesting, 1-, 2- and 3-out options, pitch, strip width and material utilisation.

  • Concept layout solver

    Station sequence and operations for each manufacturing concept.

  • 3D design layout solver

    Three-dimensional strip and station layout aligned with press and die constraints.

Forming

  • Step-by-step forming solver

    Station-by-station forming progression, thinning and critical areas, including addendum and flange forming with binder.

  • Special forming solvers

    Extrusions, collars and necking operations.

  • Springback solver

    Springback prediction to support compensation and concept decisions.

Process & loads

  • Strip stability solver

    Carrier and strip behaviour through the station sequence.

  • Force results

    Exact forming forces per operation, per station and per die, carried directly into press checks.

Evidence

  • Image creation solver

    Converts solver results into labelled engineering images for the report, so every finding is shown, not just stated.

Solvers are developed continuously. Results are reported with stated assumptions; external simulation is added where a project requires it.

SIS and GODI's own solvers

Forming feasibility and thinning, the forming sequence, springback and restrike, strip stability, strip layouts and 3D strip layouts, and critical die details such as cam units are computed with SIS and GODI's own solvers. All of it is developed in-house and is GODI's property.

See what we check

Built from quotation experience. Continually developed by GODI.

SIS is refined continuously around real stamping engineering and RFQ work. Its core engineering calculations run locally, with optional assistance for selected information tasks and engineer review throughout.

Engineering review retained
Local engineering calculations
Runs locally
Optional assistance
Selected information tasks

Put SIS to work on your next RFQ.

Engage GODI for engineering support and receive an engineer-reviewed quotation basis.